Process Equipment and Plant Design Baffles may be eliminated for Large diameter tanks None of these High viscosity liquids (> 600 poise) Low viscosity liquids (< 200 poise) Large diameter tanks None of these High viscosity liquids (> 600 poise) Low viscosity liquids (< 200 poise) ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design __________ is the determining factor for the number of bubble caps to be used per tray. Vapor load Liquid load Tray diameter Permissible slot velocity Vapor load Liquid load Tray diameter Permissible slot velocity ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design If a single tube pass heat exchanger is converted to two passes; for the same flow rate, the pressure drop per unit length in tube side will __________ times. None of these Decrease by 22 Increase by 1.8 Increase by 21.6 None of these Decrease by 22 Increase by 1.8 Increase by 21.6 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design For a given design of bubble cap, the number of bubble caps to be used per tray is set by the Plate spacing All of these Diameter of the column Allowable gas velocity through the slots Plate spacing All of these Diameter of the column Allowable gas velocity through the slots ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Where does the maximum tensile strength occur in a thick cylindrical vessel subjected to internal pressure? At the inner surface At the outer surface At the mid thickness of the cylindrical wall None of these At the inner surface At the outer surface At the mid thickness of the cylindrical wall None of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS