Power Systems Pipes carrying steam are generally of cast iron. steel. cobalt. aluminium. cast iron. steel. cobalt. aluminium. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The Gauss Seidel load flow method has following disadvantages. Which of the following statement is wrong? Unreliable convergence Choice of slack bus affects the convergence Slow convergence A good initial guess for voltages is essential for convergence Unreliable convergence Choice of slack bus affects the convergence Slow convergence A good initial guess for voltages is essential for convergence ANSWER DOWNLOAD EXAMIANS APP
Power Systems A pin type insulator has 100 kV puncture voltage. If 10 kV flash over voltage occurred in a transmission line, then find the safety factor of insulator? 0.1 0.001 1000 10 0.1 0.001 1000 10 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which statement is not correct for the transmission line parameter R, L, G and C For each line, the conductors are characterized by σ c, μ c, εo = ε c and the homog The line parameter R,L,G and C are uniformly distributed along the entire length of the line C. At high frequencies at which most of communication system operate the internal inductance of the conductor is neglected. G = I/R. R is the AC resistance per unit length of conductor C. For each line, the conductors are characterized by σ c, μ c, εo = ε c and the homog The line parameter R,L,G and C are uniformly distributed along the entire length of the line C. At high frequencies at which most of communication system operate the internal inductance of the conductor is neglected. G = I/R. R is the AC resistance per unit length of conductor C. ANSWER DOWNLOAD EXAMIANS APP
Power Systems For 132 kV system, the reactance and capacitance up to the location of the CB is 3 Ω and 0.015 μF respectively. The maximum value of RRRV is 9.01 kV / μs. 12.2 kV / μs. 2.0 kV / μs. 10.01 kV / μs. 9.01 kV / μs. 12.2 kV / μs. 2.0 kV / μs. 10.01 kV / μs. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A transmission line has an impedance of (2+j6) Ω has voltage regulation of 10% at a load power factor of 0.8 lag. Find the voltage regulation for a load of 0.6 lead 10% 6.92% -6.92% -10% 10% 6.92% -6.92% -10% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS