Power Systems Length of short transmission line is up to 80 km any of the above 150 km 40 km 80 km any of the above 150 km 40 km ANSWER DOWNLOAD EXAMIANS APP
Power Systems A transmission line has a surge impedance of 400 Ω for a length of the line of 200 km. If the length of line is increased to 400 km, then its surge impedance is 800 Ω 200 Ω 0 Ω 400 Ω 800 Ω 200 Ω 0 Ω 400 Ω ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 0 MW and PG2 = 250 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 100 Km long transmission line is loaded at 110 kV. If the loss of line is 5 MW and the load is 150 VA the resistance of the line is 2.26 Ω / phase. 8.06 Ω / phase. 4.65 Ω / phase. 6.06 Ω / phase. 2.26 Ω / phase. 8.06 Ω / phase. 4.65 Ω / phase. 6.06 Ω / phase. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A transmission line has 50 km operating at frequency of 500 Hz. Find the type of the line? any of the above long transmission line medium transmission line short transmission line any of the above long transmission line medium transmission line short transmission line ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following plants has the maximum eapital cost Hydro-plants. Steam plants. Nuclear plants. Diesel plants. Hydro-plants. Steam plants. Nuclear plants. Diesel plants. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS