Mass Transfer ______ is the separation technique used for desalination of sea water. Absorption Reverse osmosis Thermal diffusion Adsorption Absorption Reverse osmosis Thermal diffusion Adsorption ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Acetone is to be removed from air in an isothermal dilute absorber using pure water as solvent. The incoming air contains 5 mole% of acetone (yin = 0.05). The design equation to be used for obtaining the number of trays (N) of the absorber is, N+2 = 6 log (yin/yout).For 98% recovery of acetone, the number of trays required is/are 8 10 1 9 8 10 1 9 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The rate of mass transfer is not dependent upon the Degree of dispersion of one fluid in the other Interfacial surface exposed between the phases Both A & B None of these Degree of dispersion of one fluid in the other Interfacial surface exposed between the phases Both A & B None of these ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Steady state equimolal counter diffusion is encountered in Absorption of NH₃ from air by water Separation of a binary mixture by distillation All liquid-liquid diffusion systems All of these Absorption of NH₃ from air by water Separation of a binary mixture by distillation All liquid-liquid diffusion systems All of these ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid ) √T T3 T T1.5 √T T3 T T1.5 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In a distillation operation, what is the effect of the temperature of the reflux stream (given below) on the condenser and reboiler loads? Reflux conditions:(i) Reflux stream is completely liquid and is at its bubble point.(ii) Reflux stream is below its bubble point. Condenser load is the same in both the cases but reboiler load is higher in case (ii) Reboiler load is the same in both the cases but condenser load is higher in case (ii) Both condensor and reboiler loads are higher in case (ii) as compared to case (i) Condenser and reboiler loads are the same in both the cases Condenser load is the same in both the cases but reboiler load is higher in case (ii) Reboiler load is the same in both the cases but condenser load is higher in case (ii) Both condensor and reboiler loads are higher in case (ii) as compared to case (i) Condenser and reboiler loads are the same in both the cases ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS