Electrical Machines In an induction motor, the no-load slip is generally equal to less than 1 %. 4 %. 1.5 %. zero. less than 1 %. 4 %. 1.5 %. zero. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A compound dc generator is delivering full load current at a terminal voltage of 230 V. Its series-field winding gets short circuited. If its terminal voltage 1. becomes more than 230 V, it is overcompounded generator 2. becomes more than 230 V, it is differentially compounded generator 3. becomes less than 230 V, it is overcompounded generator 4. becomes less than 230 V, it is differentially compounded generator 5. becomes less than 230 V, it is level compounded generator From these, the correct answer is 2,3 1, 4 2, 3, 5 1, 4, 5 2,3 1, 4 2, 3, 5 1, 4, 5 ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In star-delta starting of squirrel cage induction motor compared to DOL starting the starting current and torque are 1/√3, 1/3 1/√3, 1/√3 1/3, 1/√3 1/3, 1/3 1/√3, 1/3 1/√3, 1/√3 1/3, 1/√3 1/3, 1/3 ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In speed control of DC Series motor, speed lower than the rated speed can be obtained by Connecting an additional resistance in the armature circuit. Connecting an additional resistance in the field circuit. Connecting an additional resistance in stator circuit. Any of the above. Connecting an additional resistance in the armature circuit. Connecting an additional resistance in the field circuit. Connecting an additional resistance in stator circuit. Any of the above. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements: To control the speed of a dc shunt motor above the base speed over a reasonably wide range, the motor must 1. have compensating winding 2. have interpole winding 3. be started using a 3-point starter 4. be started using a 4-point starter Of these statements 1, 2 and 4 are correct 1, 2 and 3 are correct 1 and 3 are correct 2 and 4 are correct 1, 2 and 4 are correct 1, 2 and 3 are correct 1 and 3 are correct 2 and 4 are correct ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines For P pole machine relation between electrical degrees and mechanical degrees is θelec = P/2*θmech θelec = 2/P*θmech θelec = θmech θelec = 4/P*θmech θelec = P/2*θmech θelec = 2/P*θmech θelec = θmech θelec = 4/P*θmech ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS