Theory of Machine In a steam engine, the distance by which the outer edge of the D-slide valve overlaps the steam port is called Steam lap Exhaust lap None of these Lead Steam lap Exhaust lap None of these Lead ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine In a four-bar chain it is required to give an oscillatory motion to the follower for a continuous rotation of the crank. For the lengths of 50 mm of crank and 70 mm of the follower, determine theoretical maximum length of coupler. The minimum length of the coupler will be 45 mm Slightly more than 45 mm Slightly less than 45 mm 95 mm 45 mm Slightly more than 45 mm Slightly less than 45 mm 95 mm ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The relation l = (2/3).(j + 2) apply only to kinematic chains in which lower pairs are used. This may be used to kinematic chains in which higher pairs are used, but each higher pair may be taken as equivalent to One lower pair and two additional links Two lower pairs and one additional link Any one of these Two lower pairs and two additional links One lower pair and two additional links Two lower pairs and one additional link Any one of these Two lower pairs and two additional links ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft, and tan φ = Coefficient of friction between the shaft and bearing) (r/2) cosφ r tanφ r cosφ r sinφ (r/2) cosφ r tanφ r cosφ r sinφ ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine The swaying couple is due to the Two cylinders of locomotive Secondary unbalanced force Partial balancing Primary unbalanced force Two cylinders of locomotive Secondary unbalanced force Partial balancing Primary unbalanced force ANSWER DOWNLOAD EXAMIANS APP
Theory of Machine In considering friction of a V-thread, the virtual coefficient of friction (μ₁) is given by μ₁ = μ sin β μ₁ = μ/cos β μ₁ = μ cos β μ₁ = μ/sin β μ₁ = μ sin β μ₁ = μ/cos β μ₁ = μ cos β μ₁ = μ/sin β ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS