Power Systems In a pressurized water reactor water is used at high pressure so that it is available is liquid from at about 280° C. heavy water is used as both coolant and moderator. both B and C. the coolant water boils in the reactor core. water is used at high pressure so that it is available is liquid from at about 280° C. heavy water is used as both coolant and moderator. both B and C. the coolant water boils in the reactor core. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The voltage regulation of a line at full load 0.8 power factor is 11. A long transmission line under no load conditions, for a good voltage profile needs shunt resistance at receiving end shunt capacitor at receiving end shunt reactor at receiving end All of these shunt resistance at receiving end shunt capacitor at receiving end shunt reactor at receiving end All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems Recovery voltage in CB is equal to normal frequency 50 Hz rms voltage. none of these. transient voltage. arcing period voltage. normal frequency 50 Hz rms voltage. none of these. transient voltage. arcing period voltage. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Deflectors are provided in Francis turbine. Pelton wheel. Kaplan turbine. propeller turbine. Francis turbine. Pelton wheel. Kaplan turbine. propeller turbine. ANSWER DOWNLOAD EXAMIANS APP
Power Systems In coal fired thermal power stations, what are the electrostatic precipitators used for? To keep the air heaters clean To collect the dust particles from the flue gases All of these To remove dust particles setting on the bus bar conductors in the station switch yard To keep the air heaters clean To collect the dust particles from the flue gases All of these To remove dust particles setting on the bus bar conductors in the station switch yard ANSWER DOWNLOAD EXAMIANS APP
Power Systems A load centre is at an equidistant from the two thermal generating stations G1 and G2. The fuel cost characteristics of the generating stations are given by F1 = a + bP1 + cP²1 F2 = a + b P2 + 2cP²2 Where P1 and P2 are the generation in MW of G1 and G2, respectively. For most economic generation to meet 300 MW of load, P1 and P2 respectively, are 200, 100 150, 150 175, 125 100, 200 200, 100 150, 150 175, 125 100, 200 ANSWER DOWNLOAD EXAMIANS APP