Irrigation Engineering If the intensity of rainfall is more than the infiltration capacity of soil, then the infiltration rate will be equal to infiltration capacity more than infiltration capacity more than rate of rainfall equal to rate of rainfall equal to infiltration capacity more than infiltration capacity more than rate of rainfall equal to rate of rainfall ANSWER DOWNLOAD EXAMIANS APP
Irrigation Engineering Cyclonic precipitation is caused by lifting of an air mass due to All of these natural topographical barriers pressure difference temperature difference All of these natural topographical barriers pressure difference temperature difference ANSWER DOWNLOAD EXAMIANS APP
Irrigation Engineering The level of the floor of a syphon aqueduct can be obtained None of these Both (a) and (b) By subtracting the depth of the culvert from the canal bed level By subtracting the thickness of culvert plus the depth of the culvert from the canal bed level None of these Both (a) and (b) By subtracting the depth of the culvert from the canal bed level By subtracting the thickness of culvert plus the depth of the culvert from the canal bed level ANSWER DOWNLOAD EXAMIANS APP
Irrigation Engineering The sinuosity of a meander is the ratio of Curved length and the straight distance None of these Meander length and the width of meander Meander length and half width of the river Curved length and the straight distance None of these Meander length and the width of meander Meander length and half width of the river ANSWER DOWNLOAD EXAMIANS APP
Irrigation Engineering While deciding the alignment of a proposed canal taking off from a river at B, three alignments of approximately equal lengths are available. These cross a drainages at C1, C2 and C3 where drainage bed levels C1 > C2 > C3, you will provide at site C3 A syphon An aqueduct A syphon aqueduct A super passage A syphon An aqueduct A syphon aqueduct A super passage ANSWER DOWNLOAD EXAMIANS APP
Irrigation Engineering If the risk of a flood occurring in the next 10 years is accepted to 10%, then the return period for design should be 1 – (0.9)°l0 1/(1-0.9°10) 1/(1+ 0.9010) 1 + (0.9)010 1 – (0.9)°l0 1/(1-0.9°10) 1/(1+ 0.9010) 1 + (0.9)010 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS