Power Systems If R = 84 ohm/Km, G = 10-6 mho/Km, H = 0.01 H/Km, C = 0.061 μ F/Km and frequency = 1000 Hz, then what is the value of propagation constant of the transmission line 0.01 + j 0.02 per Km. 0.09 + j 0.018 per Km. None of them. 0.018 per Km. 0.01 + j 0.02 per Km. 0.09 + j 0.018 per Km. None of them. 0.018 per Km. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If a 500 MVA, 11 kV 3-phase generator at 50 Hz feeds through a transfer impedance of (0+j0.605) Ω/phase, an infinite voltage also at 11 kV, then the maximum steady state power transfer on the base of 500 MVA and 11 kV is 1 pu 0.5 pu 0.8 pu 0.4 pu 1 pu 0.5 pu 0.8 pu 0.4 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems Galvanised steel is generally used as All of these structural components. earth wire. stray wire. All of these structural components. earth wire. stray wire. ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a regenerative cycle, feed water is heated by exhaust gas. drained steam from turbine. all of above. heaters. exhaust gas. drained steam from turbine. all of above. heaters. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The main objectives of electrical power transmission is/are Transmission system must be more efficient with minimum line losses Voltage regulation of the transmission line must be zero or minimum both 1 and 2 nether 1 nor 2 Transmission system must be more efficient with minimum line losses Voltage regulation of the transmission line must be zero or minimum both 1 and 2 nether 1 nor 2 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Fault calculations using computer are usually done by None of these Y bus method Z bus method either 1 or 2 None of these Y bus method Z bus method either 1 or 2 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS