Power Systems Range of accelerating factor is 50 to 100 1 to 10 10.8 to 11.2 1.6 to 1.8 50 to 100 1 to 10 10.8 to 11.2 1.6 to 1.8 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The voltage regulation of a line at full load 0.8 power factor is 11. A long transmission line under no load conditions, for a good voltage profile needs shunt reactor at receiving end shunt resistance at receiving end All of these shunt capacitor at receiving end shunt reactor at receiving end shunt resistance at receiving end All of these shunt capacitor at receiving end ANSWER DOWNLOAD EXAMIANS APP
Power Systems Mercury is choice with steam in binary vapor cycle because relative low vaporization pressure. higher critical temperature and pressure. all of above. higher saturation temperature than other fluids. relative low vaporization pressure. higher critical temperature and pressure. all of above. higher saturation temperature than other fluids. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A generator has reactances of sub transient (X")= 0.5 pu, transient (X') = 0.8 pu and synchronous reactance (X) = 5 pu. The voltages at these reactances are 1.2 V, 1.1 V and 1 V respectively. Find the corresponding sub transient fault current in pu? 2.4 pu 0.2 pu 3.975 pu 1.375 pu 2.4 pu 0.2 pu 3.975 pu 1.375 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems Zero voltage regulation is possible only for lagging power factor leading power factor unity power factor All of these lagging power factor leading power factor unity power factor All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems A load centre is at an equidistant from the two thermal generating stations G1 and G2. The fuel cost characteristics of the generating stations are given by F1 = a + bP1 + cP²1 F2 = a + b P2 + 2cP²2 Where P1 and P2 are the generation in MW of G1 and G2, respectively. For most economic generation to meet 300 MW of load, P1 and P2 respectively, are 200, 100 100, 200 175, 125 150, 150 200, 100 100, 200 175, 125 150, 150 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS