Power Systems For load flow studies, What are the quantities specified at load bus are P and V V and δ δ and Q P and Q P and V V and δ δ and Q P and Q ANSWER DOWNLOAD EXAMIANS APP
Power Systems Pump storage schemes are used to improve the plant capacity factor as well as the load factor of the power system. the load factor. the diversity factor. the power factor. the plant capacity factor as well as the load factor of the power system. the load factor. the diversity factor. the power factor. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the rated receiving end voltage is 33 kV, then what are the limits for safe operation of equipments? 25 to 35 kV 33 to 50 kV any voltage above 33 kV 31.35 to 34.65 kV 25 to 35 kV 33 to 50 kV any voltage above 33 kV 31.35 to 34.65 kV ANSWER DOWNLOAD EXAMIANS APP
Power Systems Deaerative heating is done to heat the steam. remove dissolved. remove dissolved gases in water. heat the feed water. heat the steam. remove dissolved. remove dissolved gases in water. heat the feed water. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Maximum power capacity of a transmission line can be increased by nether 1 nor 2 increasing voltage level decreasing reactance value either 1 or 2 nether 1 nor 2 increasing voltage level decreasing reactance value either 1 or 2 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The positive (Z1), negative (Z2) and zero sequence (Z0) impedances of a transmission line follows the relation Z1 = Z2 = Z0 (Z1 = Z2) > Z0 (Z1 = Z2) < Z0 any of the above Z1 = Z2 = Z0 (Z1 = Z2) > Z0 (Z1 = Z2) < Z0 any of the above ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS