Mass Transfer Dew point of an air-water vapor mixture Corresponding to any point on the humidity chart is obtained by projecting a line through this point parallel to the temperature axis and to the saturation curve At constant humidity & total pressure is fixed Decreases with decrease in pressure All of the listed here Corresponding to any point on the humidity chart is obtained by projecting a line through this point parallel to the temperature axis and to the saturation curve At constant humidity & total pressure is fixed Decreases with decrease in pressure All of the listed here ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer All moisture in a non-hygroscopic material is the __________ moisture. Equilibrium Unbound Bound Free Equilibrium Unbound Bound Free ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when A total condenser is used Saturated feed is not used An azeotrope forms The latent heat of vaporisation of the more and less volatile components are greatly different A total condenser is used Saturated feed is not used An azeotrope forms The latent heat of vaporisation of the more and less volatile components are greatly different ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer For a binary mixture distillation process, the degree of freedom is 2. However, if the pressure is fixed in this process, the number of independent variables in this process will be 3 2 1 3 2 1 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the Sensible heat Latent heat Humid heat Specific heat Sensible heat Latent heat Humid heat Specific heat ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer When the solvent dissolves very little of solute, then Solvent of low latent heat of vaporisation should be used Very small quantity of solvent is required Large quantity of solvent is required to extract the solute Solvent of low freezing point should be used Solvent of low latent heat of vaporisation should be used Very small quantity of solvent is required Large quantity of solvent is required to extract the solute Solvent of low freezing point should be used ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS