Building Construction An arch may fail due to Crushing of the material Sliding of voussoirs Uneven settlement of abutments All listed here Crushing of the material Sliding of voussoirs Uneven settlement of abutments All listed here ANSWER DOWNLOAD EXAMIANS APP
Building Construction While designing a stair, the product of rise and going is approximately kept equal to 420 450 500 350 420 450 500 350 ANSWER DOWNLOAD EXAMIANS APP
Building Construction The function of cleats in a roof truss is To prevent the purlins from tilting To support purlins To support the common rafter All of these To prevent the purlins from tilting To support purlins To support the common rafter All of these ANSWER DOWNLOAD EXAMIANS APP
Building Construction The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called Tuck pointing Recessed pointing Weather pointing V-pointing Tuck pointing Recessed pointing Weather pointing V-pointing ANSWER DOWNLOAD EXAMIANS APP
Building Construction The depth of excavation of foundations, is generally measured with a Steel tape Levelling staff Boning rod Ranging rod Steel tape Levelling staff Boning rod Ranging rod ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: The length of the foundation slab = 7.00 m All listed here Distance of C.G. of the loads from the smaller column = 3.00 m Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m All listed here Distance of C.G. of the loads from the smaller column = 3.00 m Area of footing slab = 11.00 m2 ANSWER DOWNLOAD EXAMIANS APP