Power Systems Among the following which is not non conventional energy Tidal. Geothermal. Wind. Nuclear. Tidal. Geothermal. Wind. Nuclear. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power generating station has a plant capacity of 200 MW and maximum power demand is 150 MW. If average power generation is 110 MW, then find the load factor and capacity factor respectively? 0.55 and 0.733 0.733 and 0.65 0.733 and 0.55 0.65 and 0.55 0.55 and 0.733 0.733 and 0.65 0.733 and 0.55 0.65 and 0.55 ANSWER DOWNLOAD EXAMIANS APP
Power Systems If L and C are 4 mH and 0.0001 μF respectively a current chop of magnitude 50 Amp would induced a voltage 400 kV. 100 kV. 50 kV. 200 kV. 400 kV. 100 kV. 50 kV. 200 kV. ANSWER DOWNLOAD EXAMIANS APP
Power Systems On what factor does the performance of a circuit breaker depend? None of these. Breaking speed. Both A and C. Critical length of breaking. None of these. Breaking speed. Both A and C. Critical length of breaking. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Objectives of power system is/are nether 1 nor 2 both 1 and 2 Rated voltage and frequency has to be supplied to the consumers Cost of electrical energy per KWh is to be minimum nether 1 nor 2 both 1 and 2 Rated voltage and frequency has to be supplied to the consumers Cost of electrical energy per KWh is to be minimum ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following power stations is mainly used to cover peak load on the system? coal based thermal power plant nuclear plant pumped storage hydro power plant gas based thermal power plant coal based thermal power plant nuclear plant pumped storage hydro power plant gas based thermal power plant ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS