Measurement and Instrumentation A thermo couple ammeter gives full scale deflection of 10 A, when it reads one fifth of the scale, the current will be 2 A. 4.47 A. 5.78 A. 4 A. 2 A. 4.47 A. 5.78 A. 4 A. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 10 mA. 0.5 mA. 100 mA. 1mA. 10 mA. 0.5 mA. 100 mA. 1mA. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The terminals across the source are ______________________________ if a current source is to be neglected. short circuited replaced by a source resistance open circuited replaced by a capacitor short circuited replaced by a source resistance open circuited replaced by a capacitor ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The thermocouple instruments do not have High degree of measuring accuracy High sensitivity Absence of frequency error Independence of ambient temperature High degree of measuring accuracy High sensitivity Absence of frequency error Independence of ambient temperature ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation If two 300V full scale voltmeters V1 and V2 having sensitivities of 100 kOhm/V and 150 kOhm/V are connected in series to measure 500V then V1 = 250V and V2 = 250V. V1 = 300V and V2 = 200V. V1 = 0V and V2 = 0V. V1 = 200V and V2 = 300V. V1 = 250V and V2 = 250V. V1 = 300V and V2 = 200V. V1 = 0V and V2 = 0V. V1 = 200V and V2 = 300V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC potentiometer is the best means available for the measurement of DC voltage because None of above. The precision in measurment is independent of the type of the defector used. It is possible to standardize before a measurement is undertaken. It is based on null balance technique. None of above. The precision in measurment is independent of the type of the defector used. It is possible to standardize before a measurement is undertaken. It is based on null balance technique. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS