Measurement and Instrumentation Deflection method direct measurements are most widely used as these are most accurate. most simple and least time consuming. most simple. least time consuming. most accurate. most simple and least time consuming. most simple. least time consuming. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a wheatstone bridge, a change of 6 Ω in the unknown arm of bridge is required to produce a change in deflection of 2.4 mm of the galvanometer. The sensitivity is 0.4 mm/Ω 0.8 mm/Ω 5.0 mm/Ω 2.5 mm/Ω 0.4 mm/Ω 0.8 mm/Ω 5.0 mm/Ω 2.5 mm/Ω ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A galvanometer with a full scale current of 10 mA has a resistance of 1000 Ω. The multiplying power (the ratio of measured current to galvanometer current) of 100 Ω shunt with this galvanometer is 110. 11. 100. 10. 110. 11. 100. 10. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which of following is not correct? A shunt should have a very low resistance. Voltmeter should have very high resistance. An ammeter should have a very low resitance. An electronic voltmeter draw appreciable current from the source. A shunt should have a very low resistance. Voltmeter should have very high resistance. An ammeter should have a very low resitance. An electronic voltmeter draw appreciable current from the source. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a moving coil instrument, the deflecting torque is proportional to Current Squareroot of the current Sine of the measurand Square of the current Current Squareroot of the current Sine of the measurand Square of the current ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a single phase energy meter, braking torque is provided by None of the listed here Permanent magnet Fluid friction Air friction None of the listed here Permanent magnet Fluid friction Air friction ANSWER DOWNLOAD EXAMIANS APP