Power Systems A sort line with R/X ratio 1, the zero regulation is obtained when the power factor of the load is unity 0.707 leading 0 leading 0.5 unity 0.707 leading 0 leading 0.5 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Surge impedance loading can be increased by both 1 and 2 increasing of inductance value increasing of capacitance value increasing of voltage level both 1 and 2 increasing of inductance value increasing of capacitance value increasing of voltage level ANSWER DOWNLOAD EXAMIANS APP
Power Systems If we increase the length of the transmission line, the charging current increases remains unaffected None of these decreases increases remains unaffected None of these decreases ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems Power transmission lines are transposed to reduce skin effect radio interference ferranti effect proximity effect skin effect radio interference ferranti effect proximity effect ANSWER DOWNLOAD EXAMIANS APP
Power Systems Skin effect depends on conductivity frequency relative permeability All of these conductivity frequency relative permeability All of these ANSWER DOWNLOAD EXAMIANS APP