Process Control and Instrumentation A non-linear system will have __________ steady state values. One More than one Three Two One More than one Three Two ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation The temperature of tempering oil baths maintained at 400°C during heat treatment of steel is measured by a/an __________ thermocouple. None of these Platinum-platinum/rhodium Chromel-alumel Iron-constantan None of these Platinum-platinum/rhodium Chromel-alumel Iron-constantan ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Out of the following themocouple wire insulating material, the highest temperature rating is for Teflon Asbestos Fibre glass Ceramic fibre Teflon Asbestos Fibre glass Ceramic fibre ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Suppose that the gain, time constant and dead time of a process with the following transfer function:Gc(s) = 10 exp( - 0.1s)/(0.5s + 1) are known with a possible error of ± 20% of their values. The largest permissible gain Kc of a proportional controller needs to be calculated below taking the values of process gain, time constant and dead time as 8, 0.6, 0.12 8, 0.6, 0.08 12, 0.4, 0.08 12, 0.6, 0.12 8, 0.6, 0.12 8, 0.6, 0.08 12, 0.4, 0.08 12, 0.6, 0.12 ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Stroboscope is used for the measurement of Liquid level under pressure Frequency of light Depression of freezing point Rpm of a flywheel Liquid level under pressure Frequency of light Depression of freezing point Rpm of a flywheel ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Which of the following thermocouples will give the highest output for the same value of hot and cold junction temperature? Iron-constantan Chromel-constantan All of these Platinum-platinum + rhodium Iron-constantan Chromel-constantan All of these Platinum-platinum + rhodium ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS