Hydraulics and Fluid Mechanics in ME A flow in which the viscosity of fluid is dominating over the inertia force is called Unsteady flow Steady flow Laminar flow Turbulent flow Unsteady flow Steady flow Laminar flow Turbulent flow ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm. It is required to lift a weight of 1 tonne. The force required on plunger is equal tc 1000 kg 100 kg 10 kg 1 kg 1000 kg 100 kg 10 kg 1 kg ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME A hydraulic accumulator normally consists of A cylinder and a ram Two coaxial rams and two cylinders Two cylinders, two rams and a storage device A cylinder, a piston, storage tank and control valve A cylinder and a ram Two coaxial rams and two cylinders Two cylinders, two rams and a storage device A cylinder, a piston, storage tank and control valve ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME By fitting an air vessel to the reciprocating pump, there is always a saving of work done and subsequently saving of power. The saving in case of a double acting reciprocating pump is 0.488 0.848 0.392 0.884 0.488 0.848 0.392 0.884 ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME Center of pressure compared to e.g. is Above it Above or below depending on area of body Below it At same point Above it Above or below depending on area of body Below it At same point ANSWER DOWNLOAD EXAMIANS APP
Hydraulics and Fluid Mechanics in ME The impeller of a centrifugal pump may have Any one of these Volute casing Vortex casing Volute casing with guide blades Any one of these Volute casing Vortex casing Volute casing with guide blades ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS