Power Systems A 20 MVA generator has inertia constant of 0.5 pu. Find new value for 50 MVA base? 0.5 pu 0.1 pu 0.4 pu 0.2 pu 0.5 pu 0.1 pu 0.4 pu 0.2 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems A thermal generating station has an installed capacity of 15 MW and supplies a daily load of 10 MW for 12 hours and 5 MW for remaining 12 hours. The plant capacity factor for the station is 0.75 0.6 0.5 1 0.75 0.6 0.5 1 ANSWER DOWNLOAD EXAMIANS APP
Power Systems A cable has the following characteristics, L = 0.201 µH/m and C = 196.2 pF/m. The velocity of wave propagation through cable is 159.24 m/s 159.24 m/µs 32 m/s 0.0312 m/s 159.24 m/s 159.24 m/µs 32 m/s 0.0312 m/s ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3-phase, 110 kV coaxial XLPE insulated power cable delivering power at 50 Hz, has a capacitance of 125 nF/km. If the dielectric loss tangent of XLPE is 2*10^-4, then dielcetric power loss in this cable in W/km/phase is 38.6 23.9 31.7 35.45 38.6 23.9 31.7 35.45 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Aluminium is now most commonly employed conductor material in transmission lines than copper because it is cheaper and lighter it is more conductive costlier its tensile strength is more it is cheaper and lighter it is more conductive costlier its tensile strength is more ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 50 Hz, 17.32 kV generator is connected to a power system. The system reactance and capacitance per phase are 10 mH and 0.2 mF respectively. What is the maximum voltage across the contacts of the circuit breaker at an instant when it passes through zero? 28.28 kV 31.28 kV 30.28 kV 29.28 kV 28.28 kV 31.28 kV 30.28 kV 29.28 kV ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS