The stroboscopic effect is a visual phenomenon that happens when a blinking light source glows an object in movement, generating a sequence of samples. The stroboscopic effect is based on Illuminance hence it is not related to the transmission and distribution of electric power.
In nuclear power plant the graphite is used as a moderator. The job of the moderator is to absorb some of the kinetic energy of the neutrons to slow them down. This is because slow neutrons are more easily absorbed by uranium-235. A neutron slowed In this way can start the fission process.
The transformers which are particularly designed to provide electrical isolation between primary and secondary circuits, without a change in voltage and current level are called isolation transformers. The turns ratio of such isolation transformers is 1:1 i.e N1 and N2. Hence, isolation transformers are also called 1:1 transformers. The isolation transformer greatly reduces any voltage spikes that originate on the supply side before they are transferred to the load side. Some isolation transformers are built with a turns ratio of 1:1. A transformer of this type has the same input and output voltages and is used for the purpose of isolation only. The main function of the isolation transformer is to reduce the voltage spike before it reaches the load.
No of disc required for 11 kV transmission line = 1 disc Since the transmission line is 3-phase, therefore, the number of discs required for a single-pole will be 3. Total no. of poles = 80 No of disc = 3 × 80 = 240
Phosphorus (P) has 15 electron i.e 2,8,5. Hence the number of electron in its outermost orbit is 5. Silicon (Si) has 14 electron i.e 2,8,4. Hence the number of electrons in its outermost orbit is 4.
EXAMIANS
