Measurement and Instrumentation Which of the following essential featuresis possessed by an indicating instrument? Controlling device All of the listed here Damping device Deflecting device Controlling device All of the listed here Damping device Deflecting device ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which of the following quantities consists of S.I. unit as Hertz? Force Charge Power Frequency Force Charge Power Frequency ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of emf 1.18 V obtains balances at 600 mm. A test cell is seen to obtain balance at 680 mm. The emf of test cell is 1 V. 1.7 V. 1.34 V. 1.5 V. 1 V. 1.7 V. 1.34 V. 1.5 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The total current I = I1 + I2 in a circuit is measured as I1 = 150 ± 1A , I2 = 250 ± 2A, where the limits of error are as standard deviations. I is measured as (400 ± 2.24) A (400 ± 1.5) A (400 ± 3) A (400 ± 1) A (400 ± 2.24) A (400 ± 1.5) A (400 ± 3) A (400 ± 1) A ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a moving iron meter, the deflecting torque is proportional to Current through the coil Squareroot of the measurand Sine of the measurand Square of the current through the coil Current through the coil Squareroot of the measurand Sine of the measurand Square of the current through the coil ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 11.1 V. 10.6 V. 15 V. 12.6 V. 11.1 V. 10.6 V. 15 V. 12.6 V. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS