Heat Transfer Which of the following accessories is provided in the vapor line of an evaporator for removing the entrained liquid? Baffle Bleed point Catchall Vent Baffle Bleed point Catchall Vent ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer Kg of liquid evaporated per hour in an evaporator is defined as its Steam load None of these Capacity Economy Steam load None of these Capacity Economy ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the Evaporators operate under vacuum Solution has an elevation of boiling point Evaporators opreate at atmospheric pressure None of these Evaporators operate under vacuum Solution has an elevation of boiling point Evaporators opreate at atmospheric pressure None of these ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer At constant temperature, the thermal conductivities of gases __________ with rise in pressure. Remain unchanged Increase Decrease May increase or decrease; depends on the pressure Remain unchanged Increase Decrease May increase or decrease; depends on the pressure ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer A 10 cm dia steam pipe, carrying steam at 180°C, is covered with an insulation (conductivity = 0.6 W/m.°C). It losses heat to the surroundings at 30°C. Assume a heat transfer co-efficient of 0.8 W/m².°C for heat transfer from surface to the surroundings. Neglect wall resistance of the pipe and film resistance of steam. If the insulation thickness is 2 cms, the rate of heat loss from this insulated pipe will be Less than the steam pipe with 5 cms insulation Equal to that of the uninsulated steam pipe Greater than that for uninsulated steam pipe Less than that of the uninsulated steam pipe Less than the steam pipe with 5 cms insulation Equal to that of the uninsulated steam pipe Greater than that for uninsulated steam pipe Less than that of the uninsulated steam pipe ANSWER DOWNLOAD EXAMIANS APP
Heat Transfer A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because Total heat transfer area of all the effects is -less than that in a single effect evaporator system Heat transfer co-efficient in a single effect is much lower than that in any effect in a multieffect system Boiling point elevation in a single effect system is much higher than that in any effect in a multieffect system Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect Total heat transfer area of all the effects is -less than that in a single effect evaporator system Heat transfer co-efficient in a single effect is much lower than that in any effect in a multieffect system Boiling point elevation in a single effect system is much higher than that in any effect in a multieffect system Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS