Electrical Machines Which is the arrangement of windings in a core type single phase transformer? Half lv inside and half hv outside on each core limb Half hv inside and half lv outside on each core limb Lv on one core limb and hv on the other Sandwiched lv and hv discs on each core limb Half lv inside and half hv outside on each core limb Half hv inside and half lv outside on each core limb Lv on one core limb and hv on the other Sandwiched lv and hv discs on each core limb ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The speed of a 50 Hz three phase induction motor under full load condition is 725 rpm the number of poles of the motor are ______________. 6. 8. 2. 4. 6. 8. 2. 4. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Direct-on-line (DOL) starters are not suitable for starting large DC motors, because the motor may not start. the starting torque becomes low. the starting current will be enormously high. the motor may run away. the motor may not start. the starting torque becomes low. the starting current will be enormously high. the motor may run away. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In DC machines internal characteristics are plotted between Vt vs Ia Eg vs Ia Vt vs load current Eg vs load current Vt vs Ia Eg vs Ia Vt vs load current Eg vs load current ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 5 KVA transformer has a turns ratio of N1/N2 = 10. The impedance of primary winding is 3+j5 ohms while that of secondary winding is 0.5+j0.8 ohms. The impedance of transformer when referred to primary will be 8+j13 ohms 53+j85 ohms 3.05+j5.08 ohms 3.5+j5.8 ohms 8+j13 ohms 53+j85 ohms 3.05+j5.08 ohms 3.5+j5.8 ohms ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Two identical loss less series motors connected in series across a dc supply voltage, runs at speed of N1 and N2, then ratio of their output power is N12 : N22. 1 : 1. N1 : N2. none. N12 : N22. 1 : 1. N1 : N2. none. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS