Electrical Machines What is the full form of MNP? Magnetic neutral pole. Magnetic neutral plane. Magnetic field neutral pole. Magnetic field neutral plane. Magnetic neutral pole. Magnetic neutral plane. Magnetic field neutral pole. Magnetic field neutral plane. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 100 KVA transformer is operating at 60 Hz, 240 V supply. The same transformer is operating at 50 Hz, 200 V supply. The new rating is 100 KVA 83.33 KVA 50 KVA 123.3 KVA 100 KVA 83.33 KVA 50 KVA 123.3 KVA ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A separately-excited dc motor has an armature resistance of 0.5 Ω. It runs off a 250 V dc supply Drawing an armature current of 20 A at 1500 rpm. The torque developed for an armature current Of 10 A, for the same field current, will be 15.92 Nm 15.28 Nm 15.6 Nm 16.55 Nm 15.92 Nm 15.28 Nm 15.6 Nm 16.55 Nm ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The damper windings also called the squirrel cage windings or damper grids are provided on the stator for improving power factor. consists of short-circuited copper bars embedded in the field pole faces. are provided in a synchronous motor to make it self starting. both (A) and (B). are provided on the stator for improving power factor. consists of short-circuited copper bars embedded in the field pole faces. are provided in a synchronous motor to make it self starting. both (A) and (B). ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In case of DC shunt motor if load is reduced The speed will increase abruptly. The speed will increase in proportion to reduction in load. DC Shunt Motor The speed will remains almost constant. The speed will increase abruptly. The speed will increase in proportion to reduction in load. DC Shunt Motor The speed will remains almost constant. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements : For a level compounded dc generator to run at constant voltage, the series field mmf must effectively compensate 1. armature reaction mmf 2.armature resistance drop 3. brush contact voltage drop Which of these statements is/are correct ? 1, 2 and 3 2 alone 1 and 3 1 and 2 1, 2 and 3 2 alone 1 and 3 1 and 2 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS