Machine Design Transverse fillet welded joints are designed for Tensile strength Bending strength Shear strength Compressive strength Tensile strength Bending strength Shear strength Compressive strength ANSWER DOWNLOAD EXAMIANS APP
Machine Design A long helical spring having a spring stiffness of 12 kN/m and number of turns 20, breaks into two parts with number of turns 10 each in both the parts. If the two parts are connected in series, then the softness of the resultant spring will be 12 kN/m 30 kN/m 24 kN/m 6 kN/m 12 kN/m 30 kN/m 24 kN/m 6 kN/m ANSWER DOWNLOAD EXAMIANS APP
Machine Design When a beam of rectangular cross-section of width b and depth d, is subjected to a shear force F, the maximum shear stress induced will be 3F/2bh F/bh 2F/bh 4F/bh 3F/2bh F/bh 2F/bh 4F/bh ANSWER DOWNLOAD EXAMIANS APP
Machine Design A shaft is subjected to a maximum bending stress of 80 N/mm² and maximum shearing stress equal to 30 N/mm² at a particular section. If the yield point in tension of the material is 280 N/mm² and the maximum shear stress theory of failure is used, then the factor of safety obtained will be 2.8 2.5 3.5 3 2.8 2.5 3.5 3 ANSWER DOWNLOAD EXAMIANS APP
Machine Design A bolt of M 24 × 2 means that Cross-sectional area of the threads is 24 mm² The pitch of the thread is 24 mm and depth is 2 mm The effective diameter of bolt is 24 mm and there are 2 threads per cm The nominal diameter of bolt is 24 mm and pitch is 2 mm Cross-sectional area of the threads is 24 mm² The pitch of the thread is 24 mm and depth is 2 mm The effective diameter of bolt is 24 mm and there are 2 threads per cm The nominal diameter of bolt is 24 mm and pitch is 2 mm ANSWER DOWNLOAD EXAMIANS APP
Machine Design The taper on a rectangular sunk key is 1 in 100 1 in 32 1 in 48 1 in 16 1 in 100 1 in 32 1 in 48 1 in 16 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS