Workshop Technology Thread rolling is restricted to Ferrous materials Ductile materials None of these Hard materials Ferrous materials Ductile materials None of these Hard materials ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The edge of a steel plate cut by oxygen cutting will get hardened when the carbon content is More than 0.3 percent Anywhere between 0.1 to 1 percent Less than 0.1 percent Less than 0.3 percent More than 0.3 percent Anywhere between 0.1 to 1 percent Less than 0.1 percent Less than 0.3 percent ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For arc welding Alternating current with high frequency is used Direct current is used Alternating current with low frequency is used Any one of these Alternating current with high frequency is used Direct current is used Alternating current with low frequency is used Any one of these ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology If an aluminium pattern made from a wooden master pattern is to be used for grey iron castings, then the shrinkage allowance allowed on the wooden pattern should be 10 mm/m 16 mm/m 26 mm/m 20 mm/m 10 mm/m 16 mm/m 26 mm/m 20 mm/m ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In order to produce uniform packing of sand in the moulds, a _________ is used. Sand slinger Squeezing machine Jolt machine Stripper plate machine Sand slinger Squeezing machine Jolt machine Stripper plate machine ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The casting method adopted for ornaments and toys of nonferrous alloys, is Permanent mould casting Slush casting Die casting Centrifugal casting Permanent mould casting Slush casting Die casting Centrifugal casting ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS