Workshop Technology Thermit, used in Thermit welding, is a mixture of Charcoal and iron oxide Charcoal and aluminium Charcoal, iron oxide and aluminium Iron oxide and aluminium Charcoal and iron oxide Charcoal and aluminium Charcoal, iron oxide and aluminium Iron oxide and aluminium ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness less than 5 mm, its edges Should have a double-V or U-groove on one side Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Do not require bevelling Should have a double-V or U-groove on one side Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Do not require bevelling ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In spot welding, the distance between the nearest edge of the plate and centre of weld should be equal to 3d 1.5 d 6d d 3d 1.5 d 6d d ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology the most preferred process for casting gas turbine blades is Investment moulding Die casting Sand casting Shell moulding Investment moulding Die casting Sand casting Shell moulding ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The purpose of a gate is to Act as a reservoir for the molten metal Delivers molten metal from pouring basin to gate Feed the molten metal to the casting in order to compensate for the shrinkage Delivers molten metal into the mould cavity Act as a reservoir for the molten metal Delivers molten metal from pouring basin to gate Feed the molten metal to the casting in order to compensate for the shrinkage Delivers molten metal into the mould cavity ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For obtaining a cup of diameter 25 mm and height 15 mm by drawing, the size of the round blank should be approximately 42 mm 46 mm 48 mm 44 mm 42 mm 46 mm 48 mm 44 mm ANSWER DOWNLOAD EXAMIANS APP