Workshop Technology The welding process used in joining mild steel shanks to high speed drills, is Seam welding Flash butt welding Spot welding Upset butt welding Seam welding Flash butt welding Spot welding Upset butt welding ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Tandem drawing of wires and tubes is necessary because It is not possible to reduce at one stage Annealing is needed between stages Surface finish improves after every drawing stage Accuracy in dimensions is not possible otherwise It is not possible to reduce at one stage Annealing is needed between stages Surface finish improves after every drawing stage Accuracy in dimensions is not possible otherwise ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For arc welding Alternating current with low frequency is used Any one of these Alternating current with high frequency is used Direct current is used Alternating current with low frequency is used Any one of these Alternating current with high frequency is used Direct current is used ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The surface to be machined is marked on the pattern by Yellow colour Red colour Blue colour Black colour Yellow colour Red colour Blue colour Black colour ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology A basic shaft is one whose Lower and upper deviations are zero None of the listed here Upper deviation is zero Lower deviation is zero Lower and upper deviations are zero None of the listed here Upper deviation is zero Lower deviation is zero ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The electrode tip diameter (d) in spot welding should be equal to (where t = Thickness of plate to be welded) 6 t 1.5 t 3 t √t 6 t 1.5 t 3 t √t ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS