Workshop Technology In a unilateral system of tolerance, the tolerance is allowed on Both sides of the actual size One side of the nominal size One side of the actual size Both sides of the nominal size Both sides of the actual size One side of the nominal size One side of the actual size Both sides of the nominal size ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In arc welding, the temperature of heat produced by the electric arc is of the order of 3000°C to 4000°C 5000°C to 6000°C 4000°C to 5000°C 6000°C to 7000°C 3000°C to 4000°C 5000°C to 6000°C 4000°C to 5000°C 6000°C to 7000°C ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Tandem drawing of wires and tubes is necessary because Surface finish improves after every drawing stage Annealing is needed between stages Accuracy in dimensions is not possible otherwise It is not possible to reduce at one stage Surface finish improves after every drawing stage Annealing is needed between stages Accuracy in dimensions is not possible otherwise It is not possible to reduce at one stage ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness more than 12.5 mm, its edges Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on both sides Do not require bevelling Should have a double-V or U-groove on one side Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on both sides Do not require bevelling Should have a double-V or U-groove on one side ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Loam sand is a mixture of 50% sand and 50% clay 70% sand and 30% clay 90% sand and 10% clay 30% sand and 70% clay 50% sand and 50% clay 70% sand and 30% clay 90% sand and 10% clay 30% sand and 70% clay ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The cold chisels are made by Drawing Forging Piercing Rolling Drawing Forging Piercing Rolling ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS