Building Construction The process of making the back ground rough, before plastering, is Blistering Hacking Peeling Dubbing Blistering Hacking Peeling Dubbing ANSWER DOWNLOAD EXAMIANS APP
Building Construction The additional piles which are driven to increase the capacity of supporting loads on vertical piles, are known Sinking piles Eccentric piles Raking piles Construction piles Sinking piles Eccentric piles Raking piles Construction piles ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m Distance of All listed here G. of the loads from the smaller column = 3.00 m Area of footing slab = 11.00 m2 The length of the foundation slab = 7.00 m Distance of All listed here G. of the loads from the smaller column = 3.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction According to Rankine's formula, minimum depth of foundations, is (P/w) × [(1 + sin φ)/(1 - sin φ)] (P/2w) × [(1 - sin φ)/(1 + sin φ)]² (P/w) × [(1 - sin φ)/(1 + sin φ)]² (P/w) × [(1 + sin φ)/(1 - sin φ)]² (P/w) × [(1 + sin φ)/(1 - sin φ)] (P/2w) × [(1 - sin φ)/(1 + sin φ)]² (P/w) × [(1 - sin φ)/(1 + sin φ)]² (P/w) × [(1 + sin φ)/(1 - sin φ)]² ANSWER DOWNLOAD EXAMIANS APP
Building Construction The depth of excavation of foundations, is generally measured with a Boning rod Levelling staff Ranging rod Steel tape Boning rod Levelling staff Ranging rod Steel tape ANSWER DOWNLOAD EXAMIANS APP
Building Construction The inner section of a cavity wall, is generally known as Buttress Pillar Pilaster Leaf wall Buttress Pillar Pilaster Leaf wall ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS