Building Construction You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is Mansard truss King post truss Collar truss Queen post truss Mansard truss King post truss Collar truss Queen post truss ANSWER DOWNLOAD EXAMIANS APP
Building Construction Exposed portions of vertical surface at right angles to the door or window frame, are known as Soffits Lintels Reveals Jambs Soffits Lintels Reveals Jambs ANSWER DOWNLOAD EXAMIANS APP
Building Construction In flat roof of reinforced cement concrete, the recommended angle of slope, is A few degrees 10° 200° Zero A few degrees 10° 200° Zero ANSWER DOWNLOAD EXAMIANS APP
Building Construction The size of a floor tile commonly used, is 20 cm × 20 cm × 2 cm 22.5 × 22.5 cm × 2.2 cm All listed here 15 cm × 15 cm × 1.8 cm 20 cm × 20 cm × 2 cm 22.5 × 22.5 cm × 2.2 cm All listed here 15 cm × 15 cm × 1.8 cm ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: Area of footing slab = 11.00 m2 G. of the loads from the smaller column = 3.00 m Distance of All listed here The length of the foundation slab = 7.00 m Area of footing slab = 11.00 m2 G. of the loads from the smaller column = 3.00 m Distance of All listed here The length of the foundation slab = 7.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction The vertical distance between the springing line and highest point of the inner curve of an arch is known as Extrados Spandril Intrados Rise Extrados Spandril Intrados Rise ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS