Measurement and Instrumentation The multiplier and the meter coil in a voltmeter are in Parallel Series None of the listed here Series-parallel Parallel Series None of the listed here Series-parallel ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When using ohmmeter, applied voltage is to be disconnected from the circuit because Voltage source will increase resistance The ohmmeter has its own internal battery Current will decrease resistance None of these Voltage source will increase resistance The ohmmeter has its own internal battery Current will decrease resistance None of these ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The high torque to weight ratio in an analog indicating instrument indicates low friction loss. none of these. high friction loss. nothing related to friction loss. low friction loss. none of these. high friction loss. nothing related to friction loss. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC potentiometer is designed to measure up to about 2V with a slide wire of 800 mm. A standard cell of emf 1.18 V obtains balances at 600 mm. A test cell is seen to obtain balance at 680 mm. The emf of test cell is 1.5 V. 1.34 V. 1.7 V. 1 V. 1.5 V. 1.34 V. 1.7 V. 1 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Two voltmeters have the same range 0-400V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600V be applied across them, the readings are One of the meters out of the range and other 100V 360V and 240V 400V and 200V 300V each One of the meters out of the range and other 100V 360V and 240V 400V and 200V 300V each ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The maximum percentage error in the sum of two voltage measurements when V1 = 100V ± 1% and V2 = 80V ± 5% is ± 6% ± 4% ± 2.8% ± 3% ± 6% ± 4% ± 2.8% ± 3% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS