Power Systems The most commonly used material for insulators of overhead lines is porcelain glass PVC mica porcelain glass PVC mica ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3-phase transmission line has its conductors at the corners of an equilateral triangle with side 3m. The diameter of each conductor is 1.63 cm. The inductance of the line per phase per km is 1.043 mH 1.093 mH 1.182 mH 1.232 mH 1.043 mH 1.093 mH 1.182 mH 1.232 mH ANSWER DOWNLOAD EXAMIANS APP
Power Systems Under excited Synchronous phase modifier works as series capacitor shunt capacitor shunt reactor any of the above series capacitor shunt capacitor shunt reactor any of the above ANSWER DOWNLOAD EXAMIANS APP
Power Systems If, for a given alternator in economic operation mode, the incremental cost is given by (0.012 P + 8) Rs/MWh, dPL/dP = 0.2 and plant λ = 25, then power generation is 1250 MW 1000 MW 750 MW 1500 MW 1250 MW 1000 MW 750 MW 1500 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems The conductor of a 10 Km long single phase, two wire line are separated by a distance of 1.5 m the diameter of each conductor the inductance of the circuit is 21.2 mH. 23.8 mH. 23.33 mH. 25.8 mH. 21.2 mH. 23.8 mH. 23.33 mH. 25.8 mH. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The voltage regulation of a line at full load 0.8 power factor is 11. A long transmission line under no load conditions, for a good voltage profile needs All of these shunt resistance at receiving end shunt reactor at receiving end shunt capacitor at receiving end All of these shunt resistance at receiving end shunt reactor at receiving end shunt capacitor at receiving end ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS