Workshop Technology The metal patterns as compared to wooden patterns require less Distortion allowance Shrinkage allowance Machining allowance Draft allowance Distortion allowance Shrinkage allowance Machining allowance Draft allowance ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The accuracy of micrometers, calipers, dial indicators can be checked by a Slip gauge Feeler gauge Ring gauge Plug gauge Slip gauge Feeler gauge Ring gauge Plug gauge ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness more than 12.5 mm, its edges Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on one side Do not require bevelling Should have a double-V or U-groove on both sides Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on one side Do not require bevelling ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The draft or taper allowance on casting is generally 10 to 15 mm/m 2 to 5 mm/m 1 to 2 mm/m 5 to 10 mm/m 10 to 15 mm/m 2 to 5 mm/m 1 to 2 mm/m 5 to 10 mm/m ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In backhand welding, the angle between the welding rod and the work is ___ as compared to forehand welding. More Same None of the listed here Less More Same None of the listed here Less ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The edge of a steel plate cut by oxygen cutting will get hardened when the carbon content is Anywhere between 0.1 to 1 percent Less than 0.1 percent More than 0.3 percent Less than 0.3 percent Anywhere between 0.1 to 1 percent Less than 0.1 percent More than 0.3 percent Less than 0.3 percent ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS