Workshop Technology In a cold chamber die casting machine Melting pot is separate from the machine Melting pot is an integral part of the machine Low temperature and pressure is used Melting pot may have any location Melting pot is separate from the machine Melting pot is an integral part of the machine Low temperature and pressure is used Melting pot may have any location ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Which one of the following material will require the largest size of riser for the same size of casting? Aluminium Cast iron Steel Copper Aluminium Cast iron Steel Copper ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology If an aluminium pattern made from a wooden master pattern is to be used for grey iron castings, then the shrinkage allowance allowed on the wooden pattern should be 16 mm/m 10 mm/m 20 mm/m 26 mm/m 16 mm/m 10 mm/m 20 mm/m 26 mm/m ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a bilateral system of tolerance, the tolerance is allowed on Both sides of the nominal size One side of the nominal size One side of the actual size Both sides of the actual size Both sides of the nominal size One side of the nominal size One side of the actual size Both sides of the actual size ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The cutting edge of a chisel should be Case hardened Hardened Tempered Hardened and tempered Case hardened Hardened Tempered Hardened and tempered ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness more than 12.5 mm, its edges Should have a double-V or U-groove on one side Should have a double-V or U-groove on both sides Do not require bevelling Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on one side Should have a double-V or U-groove on both sides Do not require bevelling Should be bevelled to a single-V or U-groove ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS