Applied Mechanics and Graphic Statics The graphical method of determining the forces in the members of a truss is based on None of the two methods Method of section Method of joint Either method None of the two methods Method of section Method of joint Either method ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics M.I. of solid sphere, is Mr² ½ Mr² ⅔ Mr² πr4/2 Mr² ½ Mr² ⅔ Mr² πr4/2 ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics Free body diagram is an Isolated joint with only body forces acting on it Isolated joint with internal forces acting on it None of these Isolated joint with all the forces, internal as well as external, acting on it Isolated joint with only body forces acting on it Isolated joint with internal forces acting on it None of these Isolated joint with all the forces, internal as well as external, acting on it ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A rod AB carries three loads of 30 N, 70 N and 100 N at distances of 20 mm, 90 mm and 150 mm respectively from A. Neglecting the weight of the rod, the point at which the rod will balance is 125.5 mm from A 132.5 mm from A 109.5 mm from A 119.5 mm from A 125.5 mm from A 132.5 mm from A 109.5 mm from A 119.5 mm from A ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A ball moving with a velocity of 5 m/sec impinges a fixed plane at an angle of 45° and its direction after impact is equally inclined to the line of impact. If the coefficient of restitution is 0.5, the velocity of the ball after impact will be 2.5 m/sec 3.5 m/sec 1.5 m/sec 0.5 m/sec 2.5 m/sec 3.5 m/sec 1.5 m/sec 0.5 m/sec ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics In a lifting machine with efficiency 60%, an effort of 200 N is required to raise a load of 6 kN. The velocity ratio of the machine is 80 60 50 30 80 60 50 30 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS