Measurement and Instrumentation The core flux in the CT of above question no.6, under the given operating conditions is 1000 mWb. 225 mWb. 450 mWb. 0. 1000 mWb. 225 mWb. 450 mWb. 0. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is Faulty None of these All right Short-circuited Faulty None of these All right Short-circuited ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For power measurement of three phase circuit by two wattmeter method, when the value of power factor is less than 0.5 lagging One of the wattmeter connections will have to be reversed Both give the same readings Pressure coil of the wattmeter will become ineffective. One of the wattmeters will read zero One of the wattmeter connections will have to be reversed Both give the same readings Pressure coil of the wattmeter will become ineffective. One of the wattmeters will read zero ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In measurement system, the function of the signal manipulating elements is to change the magnitude of the input signal while retaining its identity. to perform non liner operation like clipping filtering, chopping and clamping. to perform linear operation like addition and multiplication. change the quantity under measurement to an analogues signal. change the magnitude of the input signal while retaining its identity. to perform non liner operation like clipping filtering, chopping and clamping. to perform linear operation like addition and multiplication. change the quantity under measurement to an analogues signal. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The meter constant of a single phase 240 V induction watthour meter is 400 revolutions per KWh. The speed of the meter disc for a current of 10 Amperes of 0.8 p.f lagging will be 12.8 rpm. 21.1 rpm. 16.02 rpm. 18.2 rpm. 12.8 rpm. 21.1 rpm. 16.02 rpm. 18.2 rpm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In flux meter, the controlling torque is produced by weight attached to the moving coil. crossed coil mechanism. spring. not provided at all. weight attached to the moving coil. crossed coil mechanism. spring. not provided at all. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS