Machine Design The bearings of medium series have capacity __________ over the light series. 30 to 40% 10 to 20% 20 to 30% 40 to 50% 30 to 40% 10 to 20% 20 to 30% 40 to 50% ANSWER DOWNLOAD EXAMIANS APP
Machine Design The period during which the cam follower remains at rest, when cam moves, is known as Dwell period Constant period Idle period Fixed period Dwell period Constant period Idle period Fixed period ANSWER DOWNLOAD EXAMIANS APP
Machine Design Two shafts ‘A’ and ‘B’ under pure torsion are of identical length and identical weight and are made of the same material. The shaft ‘A’ is solid and the shaft ‘B’ is hollow. We can say that Shaft B is better than shaft A None of these Shaft A is better than shaft B Both the shafts are equally good Shaft B is better than shaft A None of these Shaft A is better than shaft B Both the shafts are equally good ANSWER DOWNLOAD EXAMIANS APP
Machine Design A shaft is subjected to a maximum bending stress of 80 N/mm² and maximum shearing stress equal to 30 N/mm² at a particular section. If the yield point in tension of the material is 280 N/mm² and the maximum shear stress theory of failure is used, then the factor of safety obtained will be 3.5 2.8 3.0 2.5 3.5 2.8 3.0 2.5 ANSWER DOWNLOAD EXAMIANS APP
Machine Design The centre distance between two meshing involute gears is equal to Difference of base circle radii/cosφ Sum of base circle radii/cosφ Difference of pitch circle radii/cosφ Sum of pitch circle radii/cosφ Difference of base circle radii/cosφ Sum of base circle radii/cosφ Difference of pitch circle radii/cosφ Sum of pitch circle radii/cosφ ANSWER DOWNLOAD EXAMIANS APP
Machine Design In most machine members, the damping capacity of the material should be Zero High Could be anything Low Zero High Could be anything Low ANSWER DOWNLOAD EXAMIANS APP