Manufacturing And Production Technology The angle formed by the leading edge of the land with a plane having the axis of the drill, is called Lip clearance angle Helix or rake angle Point angle Chisel edge angle Lip clearance angle Helix or rake angle Point angle Chisel edge angle ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In a metal arc welding process, a gas metal arc welding with magnetized flux is used and can be done in all the positions i.e. flat position, vertical position or inclined position. Dip transfer Spray transfer Globular transfer GMAW practice Dip transfer Spray transfer Globular transfer GMAW practice ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 30.56 36.56 26.56 20.56 30.56 36.56 26.56 20.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The angle between the lathe centres is 60° 90° 30° 45° 60° 90° 30° 45° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The trade name of a nonferrous cast alloy composed of cobalt, chromium and tungsten is called Cemented carbide Stellite Diamond Ceramic Cemented carbide Stellite Diamond Ceramic ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The swing diameter over the bed is ________ the height of the centre measured from the bed of the lathe. Twice Thrice One-half Equal to Twice Thrice One-half Equal to ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS