Engineering Mechanics Static friction is always __________ dynamic friction. None of these Greater than Equal to Less than None of these Greater than Equal to Less than ANSWER DOWNLOAD EXAMIANS APP
Engineering Mechanics A force while acting on a body may Give rise to the internal stresses in it Change its motion All of these Balance the forces, already acting on it Give rise to the internal stresses in it Change its motion All of these Balance the forces, already acting on it ANSWER DOWNLOAD EXAMIANS APP
Engineering Mechanics According to parallel axis theorem, the moment of inertia of a section about an axis parallel to the axis through center of gravity (i.e. IP) is given by(where, A = Area of the section, IG = Moment of inertia of the section about an axis passing through its C.G., and h = Distance between C.G. and the parallel axis.) IP = IG + Ah2 IP = IG / Ah2 IP = IG - Ah2 IP = Ah2 / IG IP = IG + Ah2 IP = IG / Ah2 IP = IG - Ah2 IP = Ah2 / IG ANSWER DOWNLOAD EXAMIANS APP
Engineering Mechanics If a number of forces are acting at a point, their resultant will be inclined at an angle 'θ' with the horizontal, such that tanθ = ΣH/ΣV tanθ = ΣV/ΣH tanθ = √(ΣV + ΣH) tanθ = ΣV × ΣH tanθ = ΣH/ΣV tanθ = ΣV/ΣH tanθ = √(ΣV + ΣH) tanθ = ΣV × ΣH ANSWER DOWNLOAD EXAMIANS APP
Engineering Mechanics On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be Zero at its upper end Upwards at its upper end Downwards at its upper end Perpendicular to the wall at its upper end Zero at its upper end Upwards at its upper end Downwards at its upper end Perpendicular to the wall at its upper end ANSWER DOWNLOAD EXAMIANS APP
Engineering Mechanics A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 2.5 cm 4.0 cm 3.0 cm 5.0 cm 2.5 cm 4.0 cm 3.0 cm 5.0 cm ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS