Measurement and Instrumentation Relative permittivity can be measured by _______ bridge Wheatstones. Schering. Hays. Desautys. Wheatstones. Schering. Hays. Desautys. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Purely mechanical instrument cannot be used for dynamic measurements because they have high inertia. large time constant. All of these higher response time. high inertia. large time constant. All of these higher response time. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistance is measured by the voltmeter-ammeter method employing dc excitation and a voltmeter of very high resistance connected directly across the unknown resistance. If the voltmeter and ammeter reading are subject to maximum possible errors of ± 2.4 % and ± 1.0 % respectively, then the magnitude of the maximum possible percentage error in the value of resistance deduced from the measurement is nearly ± 2.4% ± 1.4% ± 3.4% ± 1% ± 2.4% ± 1.4% ± 3.4% ± 1% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which of following statement are correct in case of power factor meter? The restoring torque is provided by a controlling torque. Both B and C. The deflection is proportional to phase angle between field coil and crossed coil. It consist of two coils mounted at right angles to each other. The restoring torque is provided by a controlling torque. Both B and C. The deflection is proportional to phase angle between field coil and crossed coil. It consist of two coils mounted at right angles to each other. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Resolution of an instrument is the maximum non linearity. the maximum quantity it can measure. ability to distinguish polarity. the minimum quantity it can measure. the maximum non linearity. the maximum quantity it can measure. ability to distinguish polarity. the minimum quantity it can measure. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Two capacitance, C1 = 150 ± 2.4µF and C2 = 120 ± 1.5 µF are connected in parallel. What is the limiting error of the resultant capacitance C (in µF) ? 0.9µF 1.5µF 3.9µF 2.4µF 0.9µF 1.5µF 3.9µF 2.4µF ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS