Power Systems Rankine cycle efficiency of a steam power plant is of 60 - 80 %. 45 - 80 %. 20 - 30 %. 30 - 45 %. 60 - 80 %. 45 - 80 %. 20 - 30 %. 30 - 45 %. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 100 MVA alternator operating at full load at 50 Hz. H = 4 MWsec/MVA, Td = 0.5 sec. One of the transmission line is tripped. So that output of generator is reduced to 70 MW. Find the frequency deviation during this time? 0.92 0.56 -0.92 -0.56 0.92 0.56 -0.92 -0.56 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of following statement are false Nuclear power plants are used as peak load plants only. In nuclear power plants, chain reaction is controlled by cadmium rods. In a nuclear reactor, multiplication factor is kept almost equal to one. A thermal reactor needs a moderator material. Nuclear power plants are used as peak load plants only. In nuclear power plants, chain reaction is controlled by cadmium rods. In a nuclear reactor, multiplication factor is kept almost equal to one. A thermal reactor needs a moderator material. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Surge impedance loading of a transmission line can be increased by addition of lumped inductance in parallel both 1 and 3 addition of lumped capacitance in series increasing its voltage level addition of lumped inductance in parallel both 1 and 3 addition of lumped capacitance in series increasing its voltage level ANSWER DOWNLOAD EXAMIANS APP
Power Systems Switchgear equipment include switches. relays and CB. all of these. fuses. switches. relays and CB. all of these. fuses. ANSWER DOWNLOAD EXAMIANS APP
Power Systems In thermal plant most of the energy is wasted in condenser ESP turbines boiler condenser ESP turbines boiler ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS