Process Equipment and Plant Design Cylinderical shell thickness of rotary drier is generally __________ mm. 43990 43864 44180 18-22 43990 43864 44180 18-22 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design A cylinderical pressure vessel of volume 6 πm³ has to be designed to withstand a maximum internal pressure of 10 atm. The allowable design stress of the material is 125N/mm² and corrosion allowance is 2 mm. The thickness of the vessel for a length/diameter ratio of 3 will be close to 6 mm 8 mm 5 mm 10 mm 6 mm 8 mm 5 mm 10 mm ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The distance between the top of the slots and the liquid surface when the static liquid is just ready to flow over the overflow weir is called Skirt clearance Static submergence Downcomer liquid seal None of these Skirt clearance Static submergence Downcomer liquid seal None of these ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Liquid gradient over the tray results due to the Large plate spacing Resistance offered to flow of liquids by caps & risers and the flow of gas Large reflux ratio Low gas velocity Large plate spacing Resistance offered to flow of liquids by caps & risers and the flow of gas Large reflux ratio Low gas velocity ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Large process vessels operating under extreme temperature and pressure conditions are normally clad/ lined with materials like stainless steel, aluminium, nickel & its alloys, copper & its alloys and titanium. The cladding thickness is generally about __________ percent of the total thickness. 40 to 50 10 to 20 30 to 40 1 to 5 40 to 50 10 to 20 30 to 40 1 to 5 ANSWER DOWNLOAD EXAMIANS APP