Surveying Longitude of a place is the angular distance between the meridian of the place and The International Date Line Both (A) and (C) of above The standard meridian That of Greenwich The International Date Line Both (A) and (C) of above The standard meridian That of Greenwich ANSWER DOWNLOAD EXAMIANS APP
Surveying If the general ground level of any area is 10% of the flying height, the principal points may be used as the centers of radial directions for small scale mapping even in tilted photograph up to 4° 2° 1° 3° 4° 2° 1° 3° ANSWER DOWNLOAD EXAMIANS APP
Surveying Normal tension is that pull which makes the correction due to pull equal to zero makes the correction due to sag equal to zero is used at the time of standardising the tape neutralizes the effect due to pull and sag makes the correction due to pull equal to zero makes the correction due to sag equal to zero is used at the time of standardising the tape neutralizes the effect due to pull and sag ANSWER DOWNLOAD EXAMIANS APP
Surveying If the distance between the projectors is altered by a movement along X-axis of one projector, The scale of the model is altered y-parallax is not affected The length of the air base is increased All listed here The scale of the model is altered y-parallax is not affected The length of the air base is increased All listed here ANSWER DOWNLOAD EXAMIANS APP
Surveying If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant is 0.1 0.6 0.4 1.33 0.1 0.6 0.4 1.33 ANSWER DOWNLOAD EXAMIANS APP
Surveying The most convenient co-ordinate system for specifying the relative positions of heavenly bodies on the celestial sphere, is Declination and right ascension system Declination and hour angle system Altitude and azimuth system Declination and altitude system Declination and right ascension system Declination and hour angle system Altitude and azimuth system Declination and altitude system ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS