Refrigeration and Air Conditioning In vapour compression cycle, the condition of refrigerant is saturated liquid Before passing through the condenser After passing through the expansion throttle valve After passing through the condenser Before entering the expansion valve Before passing through the condenser After passing through the expansion throttle valve After passing through the condenser Before entering the expansion valve ANSWER DOWNLOAD EXAMIANS APP
Refrigeration and Air Conditioning Which of the following refrigerant has the highest freezing point. R-12 Carbon dioxide Ammonia Sulphur dioxide R-12 Carbon dioxide Ammonia Sulphur dioxide ANSWER DOWNLOAD EXAMIANS APP
Refrigeration and Air Conditioning The sensible heat factor during cooling and dehumidification process is given by (where h₁ = Enthalpy of air entering the cooling coil, h₂ = Enthalpy of air leaving the cooling coil, and hA = Enthalpy of air at the end of dehumidification process) (h1 - h2)/ (hA - h2) (hA - h2)/ (h1 - h2) (hA - h1)/ (h2 - h1) (h2 - hA)/ (h1 - h2) (h1 - h2)/ (hA - h2) (hA - h2)/ (h1 - h2) (hA - h1)/ (h2 - h1) (h2 - hA)/ (h1 - h2) ANSWER DOWNLOAD EXAMIANS APP
Refrigeration and Air Conditioning A good refrigerant should have High specific volume and high latent heat of vaporisation Low C.O.P. and low freezing point High latent heat of vaporisation and low freezing point High operating pressures and low freezing point High specific volume and high latent heat of vaporisation Low C.O.P. and low freezing point High latent heat of vaporisation and low freezing point High operating pressures and low freezing point ANSWER DOWNLOAD EXAMIANS APP
Refrigeration and Air Conditioning On the pressure-enthalpy diagram, condensation and desuperheating is represented by a horizontal line because the process Takes place at constant entropy Takes place at constant pressure Involves no change in volume Takes place at constant temperature Takes place at constant entropy Takes place at constant pressure Involves no change in volume Takes place at constant temperature ANSWER DOWNLOAD EXAMIANS APP
Refrigeration and Air Conditioning The atmospheric air at dry bulb temperature of 15°C enters a heating coil maintained at 40°C. The air leaves the heating coil at 25°C. The bypass factor of the heating coil is 0.4 0.6 0.376 0.67 0.4 0.6 0.376 0.67 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS