Electrical Machines In DC generator on no-load, the air gap flux distribution in space is triangular. sinusoidal. flat topped. pulsating. triangular. sinusoidal. flat topped. pulsating. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A transformer core is made up of a silicon steel laminations which has maximum flux density 1 Tesla. If it was cold rolled grain oriented its flux density increases to 1.6 Tesla. What is the saving in core size or area due to cold rolled grain oriented process? 38% 68% 40% 60% 38% 68% 40% 60% ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In above question, the output power delivered by generator G1 and G2 will be 9.6 kW, 12 kW. 9.3 kW, 9.3 kW. 6.3 kW, 9.3 kW. 5.7 kW, 8.7 kW. 9.6 kW, 12 kW. 9.3 kW, 9.3 kW. 6.3 kW, 9.3 kW. 5.7 kW, 8.7 kW. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements: To control the speed of a dc shunt motor above the base speed over a reasonably wide range, the motor must 1. have compensating winding 2. have interpole winding 3. be started using a 3-point starter 4. be started using a 4-point starter Of these statements 1, 2 and 4 are correct 2 and 4 are correct 1 and 3 are correct 1, 2 and 3 are correct 1, 2 and 4 are correct 2 and 4 are correct 1 and 3 are correct 1, 2 and 3 are correct ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 8-pole, DC generator has a simplex wave-wound armature containing 32 coils of 6 turns each. Its flux per pole is 0.06 Wb. The machine is running at 250 rpm. The induced armature voltage is 192 V 384 V 96 V 768 V 192 V 384 V 96 V 768 V ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The material used for commutator brushes is mostly cast iron. copper. mica. carbon. cast iron. copper. mica. carbon. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS