Measurement and Instrumentation In a wheatstone bridge, a change of 6 Ω in the unknown arm of bridge is required to produce a change in deflection of 2.4 mm of the galvanometer. The sensitivity is 0.4 mm/Ω 5.0 mm/Ω 0.8 mm/Ω 2.5 mm/Ω 0.4 mm/Ω 5.0 mm/Ω 0.8 mm/Ω 2.5 mm/Ω ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The resistance in the circuit of the moving coil of a dynamometer wattmeter should be Low Almost zero None of the listed here High Low Almost zero None of the listed here High ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a gravity controlled instrument, the deflection angle is proportional Measurand Square of the measurand Sine inverse of measurand Sine of the measurand Measurand Square of the measurand Sine inverse of measurand Sine of the measurand ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a ballistic galvanometer, the deflecting torque is proportional to Square of current through coil The current through coil Square-root of current through coil Sine of measured Square of current through coil The current through coil Square-root of current through coil Sine of measured ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The errors mainly caused by human mistakes are gross error. instrumental error. observational error. systematic error. gross error. instrumental error. observational error. systematic error. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The time/div and voltage axes of an oscilloscope have been creased. A student connects a 1 KHz, 5 V P-P square wave calibrition pulse to channel-1 of the scope and observes the screen to be as shown in the upper trace of figure. An unknown signal is connected to channel-2 (lower trace) of the scope. If the time/div and V/div on both channels are the same, the amplitude (P-P) and period of the unknown signal are respectively 7.5 V, 2 ms. 5 V, 1 ms. 5 V, 2 ms. 10 V, 1 ms. 7.5 V, 2 ms. 5 V, 1 ms. 5 V, 2 ms. 10 V, 1 ms. ANSWER DOWNLOAD EXAMIANS APP