Measurement and Instrumentation The difference between the indicated value and the true value of a quantity is Absolute error Relative error Gross error Dynamic error Absolute error Relative error Gross error Dynamic error ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation 0-150 V voltmeter has an accuracy of 1% of full-scale reading. The voltage measured by the instrument is 75 V. The limiting error is 1% 4% 2% 3% 1% 4% 2% 3% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is Short-circuited Faulty None of these All right Short-circuited Faulty None of these All right ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The absolute measurement of resistance is done by Ohm’s law method Bridge Method Lorenz method Rayleigh method Ohm’s law method Bridge Method Lorenz method Rayleigh method ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A slide wire potentiometer has 10 wires of 1 m each. With the help of a standard voltage source of 1.018 V it is standardised by keeping the jockey at 101.8 cm. If the resistance of the potentiometer wires is 1000 ohm, then the value of the working current will be 0.5 mA. 10 mA. 100 mA. 1mA. 0.5 mA. 10 mA. 100 mA. 1mA. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The range of a moving iron ac ammeter is extended by None of the listed here Changing number of turns of operating coil A shunt A multiplier None of the listed here Changing number of turns of operating coil A shunt A multiplier ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS