Measurement and Instrumentation In a ballistic galvanometer, the deflecting torque is proportional to The current through coil Square-root of current through coil Square of current through coil Sine of measured The current through coil Square-root of current through coil Square of current through coil Sine of measured ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The power factor of a single phase load can be calculated if the instruments available are Any of the listed here One ammeter, one voltmeter and one energy meter One voltmeter, one ammeter and one wattmeter One voltmeter and one ammeter Any of the listed here One ammeter, one voltmeter and one energy meter One voltmeter, one ammeter and one wattmeter One voltmeter and one ammeter ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which of following is not correct? An electronic voltmeter draw appreciable current from the source. An ammeter should have a very low resitance. Voltmeter should have very high resistance. A shunt should have a very low resistance. An electronic voltmeter draw appreciable current from the source. An ammeter should have a very low resitance. Voltmeter should have very high resistance. A shunt should have a very low resistance. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation What is the standard unit for length ? Kilometer Inch Meter Centimeter Kilometer Inch Meter Centimeter ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measuring an AC voltage by an AC potentiometer it is desirable that the supply for the potentiometer is taken from Any of above. A battery. The same source as the unknown voltage. A source other than the source of unknown voltage. Any of above. A battery. The same source as the unknown voltage. A source other than the source of unknown voltage. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistance is measured by the voltmeter-ammeter method employing dc excitation and a voltmeter of very high resistance connected directly across the unknown resistance. If the voltmeter and ammeter reading are subject to maximum possible errors of ± 2.4 % and ± 1.0 % respectively, then the magnitude of the maximum possible percentage error in the value of resistance deduced from the measurement is nearly ± 1% ± 1.4% ± 3.4% ± 2.4% ± 1% ± 1.4% ± 3.4% ± 2.4% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS